Hi

I just loaded HD-9200BL_070930_9205_api.bin, after reboot it is look like my pansat is down. I can not see any picture, I can not reload anything.

I put the factory bin in the usb but nothing happened after on/off the switch. I see the time on the pansat panel, and no picture.

Any suggestion?
:sad:

Actualy I load the 9200 to 9000. What a mistake. Can I do anything to roll it back?

Hi

I just loaded HD-9200BL_070930_9205_api.bin, after reboot it is look like my pansat is down. I can not see any picture, I can not reload anything.

I put the factory bin in the usb but nothing happened after on/off the switch. I see the time on the pansat panel, and no picture.

Any suggestion?
:sad:
Try turning the receiver ON with the remote control---or the front ON/Off switch.

Well Setwire this is kind of the answer that I was looking for ...
It did not help me however if somebody get same problem maybe it would help.

From my side I will send it to pansat to repair....

This is a very simple way to restore any 9000 Hd unit if it is stuck on b-05,06,07

Download the factory bin and rename the file to API_FILE

Once you rename the Factory bin to API_FILE you can apply this to your usb memory stick alone in no folders


Step:1 Rename the factory bin to API_FILE

Step:2 Put the API_FILE on your USB stick in no folders

Step:3 Plug the unit in with the power off

Step:4 HOLD the Right button on the face plate with the USB Stick plugged in

Step:5 Turn the power on with the toggle switch wile you are still holding the right arrow

Step:6 API will appear on the screen you now can stop holding your right arrow

Step:7 it will say API,Succ,End

Step:8 If it doesnt work please re try the steps again